Precautions for the use of cold bending mechanical equipment

Precautions for the use of cold bending mechanical equipment - Senyu Technology

Operation method of cold-formed machinery
1. Choose a flat table and stabilize the machine, you can pull the chassis feet apart to make the machine panel easy to observe.
2. Insert the plug on the handheld sensor head into the socket on the panel and screw it tight. Pay attention to locate the gap ·
3. Plug one end of the power cord into the socket on the rear panel of the case, and the other end into the power supply socket, be sure to use a single-phase three-wire power supply.
4. Turn on the "Power Master Switch" on the rear panel of the case, press the "Power Switch" button on the panel, and wait for the "Ready" green indicator to turn on, and the machine can work.
5. Press and hold the "Setup Button" button to set it to a suitable value, generally between 0.5-2.0 seconds.
6. Put the induction head on the lid of the container, press the start button on the handle, then the "heating" red indicator light is on, indicating that it is heating, the induction head should not be moved, and then remove the induction head after the "heating" red indicator light is off, and then the sealing operation of the next container can be carried out after the "ready" green indicator light is on or the buzzer in the machine is short "beep" prompt.
7. Check the sealing quality, according to different materials, diameter containers and production efficiency, appropriate trimming" set the button key, so that the sealing quality is the best.

The company is now involved in electric power, elevators, Shelf Cold Bending, Door And Window Equipment, Electrical cabinet cold bending, Elevator Door Cover and other industries. Since its establishment, the company has been committed to the development and professional customization of satisfactory Cold Bending Equipment for customers. Let every customer rest assured and comfortable.